1. <thead id="zxzmr"><del id="zxzmr"></del></thead>

      <blockquote id="zxzmr"><del id="zxzmr"><video id="zxzmr"></video></del></blockquote><sub id="zxzmr"></sub>
      ?
      输送带导航/TEL:0312-8391666
      输送带行业新闻

      环形 [huán xíng] 输送带(环型输送带)是在生产过程

      作者:河北橡胶输送带  来源:   发布时间:2019-02-02 10:28:55

      环形 [huán xíng] 输送带(环型输送带)是在生产过程 [guò chéng]中将输送带制成无接头 [jiē tóu] 环形输送带(环型输送带),其特点是带芯没有接头,没有因接处早期损坏 [sǔn huài] 而影响使用寿命,胶带表面平整、张力均匀,因此胶带运转平稳 [píng wěn] ,使用伸长率小。
      环型输送带,环状 [huán zhuàng] 输送带: 环形输送带系指生产过程已将输送带制成无接头 [jiē tóu] 的环形输送带,其带芯接头处强力可达到胶带本体强力的90%,胶带表面无明显接头缺陷 [quē xiàn] ,因此,胶带运输平衡,使用伸长小?;沸问渌痛居糜胖嗜藁蛭藿恢贾瞥?,一般2-6层 [céng] 或用NN-200型尼龙帆布(或聚酯 帆布)作强力层。
      环形输送带长度及极限偏差 [piān chā] : 环形输送带长度m 极限偏差mm 长度小于15 ± 50 长度15-20 ± 75 长度大于20 带长的 ± 0.5% 本公司可根据客户需要生产合适长度、宽度 [kuān dù] 和厚度的普通型、耐热型(≤120oC)、 耐寒型(不低于-40oC)、耐酸碱型、耐高温型(不高于150oC)及卫生型环形输送带。
      Annular conveyor belt (annular conveyor belt) is a kind of joint-free annular conveyor belt (annular conveyor belt) made of conveyor belt in the production process. Its characteristics are that there are no joints in the core of the belt, and the service life is not affected by the early damage of the joints. The surface of the belt is flat and the tension is even, so the belt runs smoothly and the elongation is small.            Ring conveyor belt: Ring conveyor belt refers to the production process has been made into a joint-free ring conveyor belt, its core joint strength can reach 90% of the belt body strength, no obvious joint defects on the surface of the belt, therefore, belt transport balance, use elongation is small. The core of the annular conveyor belt is made of high quality cotton or vinylon interwoven canvas, generally 2-6 layers or NN-200 nylon canvas (or polyester canvas) as the strong layer.            Ring conveyor belt length and limit deviation: Ring conveyor belt length m limit deviation m m length less than 15 (+50) length 15-20 (+75) length greater than 20 belt length (+0.5%) The company can produce suitable length, width and thickness of the general type, heat-resistant type (<120oC), cold-resistant type (not less than-40oC), acid-alkali-resistant type, high-temperature-resistant type (not more than 150oC) and sanitary type according to customer needs. Annular conveyor belt. 

      相关阅读

      相关产品

      ?