1. <thead id="zxzmr"><del id="zxzmr"></del></thead>

      <blockquote id="zxzmr"><del id="zxzmr"><video id="zxzmr"></video></del></blockquote><sub id="zxzmr"></sub>
      ?
      输送带导航/TEL:0312-8391666
      输送带行业新闻

      钢丝绳 [shéng]输送带的损坏有多种形式 [xíng shì]

      作者:河北橡胶输送带  来源:   发布时间:2019-02-04 09:23:48

      钢丝绳 [shéng]输送带的损坏有多种形式 [xíng shì],主要为:上胶面严重磨损 [mó sǔn];扯边;撕裂 [sī liè]。其中,输送带撕裂是危害 [wēi hài]最大的一种 [chóng]损坏形式,它主要是指输送物料 [liào]中的尖锐杂质插入输送带或输送带中钢丝抽 [chōu]出造成输送带纵向的撕裂。输送带撕裂虽是一种偶然 [ǒu rán]性的损坏,但破坏 [pò huài]性大,若不能及时控制 [kòng zhì]便会造成整条输送带撕裂(撕裂数千米 [qiān mǐ]输送带的事故在港口 [gǎng kǒu]时有发生),进而引起停产 [tíng chǎn],给港口带来巨大的直接和间接经济 [jīng jì]损失。所以对输送带撕裂的防护及检测 [jiǎn cè]工作,一直受到输送带生产厂 [chǎng]家、用户的重视。同时,有关国家标准也要求输送带应安装防止 [fáng zhǐ]纵向撕裂和撕裂检测装置。
      There are many kinds of damages of steel rope conveyor belt, mainly as follows: serious wear and tear of upper rubber surface; edge tear; tear. Among them, conveyor belt tearing is the most harmful form of damage. It mainly refers to the longitudinal tearing of conveyor belt caused by the sharp impurities in conveyor material inserted into conveyor belt or steel wire pulled out of conveyor belt. Conveyor belt tearing is a kind of accidental damage, but it is destructive. If it can not be controlled in time, it will cause the whole conveyor belt tearing (the accident of tearing thousands of meters of conveyor belt occurs in the port from time to time), which will lead to shutdown of production and bring huge direct and indirect economic losses to the port. Therefore, the protection and detection of conveyor belt tear has been taken seriously by conveyor belt manufacturers and users. At the same time, the relevant national standards also require that conveyor belts should be equipped with detection devices to prevent longitudinal tearing and tearing.

      相关阅读

      相关产品

      ?